Specifications

Product name

HDD Stand Converter

Model number

CROSU2

Interface

Based on USB/Rev2.0

Weight

630 g

D imension

130 mm ( W ) x 68 mm ( H ) x 90 mm ( D )  

Temperature and Humidity

5 ～ 35 ℃ 、 humidity 20 ～80%
* this machine should be used in the operation range of the connected PC.

Windows

Supported machine

・     PC/AT compatible machine equipped with USB2.0 interface port （ at operating mode USB2.0 ）

・     PC/AT compatible machine equipped with USB1.1 interface port （ at operating mode USB1.1 ）
※ machine with Intel chip set is recommended.

・     Capacity larger than Pentium300MHz / main memory 128MB  

Supported OS

・     Windows2000/WindowsXP

※ This product does not operate under Windows95 / Windows98 / Windows98SE / Windows3.x / WindowsNT / WindowsMe

※ This product might not operate properly under computer which was produced before Windows98 release because of its USB port.

※ Machines below are not guaranteed to be supported, as this product might not operate properly under these.

・ TOSHIBA  DynaBook , Satellite series （ equipped with K6 CPU ）
・ IBM Aptiva E series （ equipped with AMD K6 CPU ）
・ SOTEC e-note M260 series

※ PC equipped with sis7000/7001/7002.PCItoUSB Host Controller might not operate properly because of its USB Host Controller.

※ Not all the operations in every environment are guaranteed.

Macintosh

Supported machine

・     Power Macintosh G5 、 Mac mini 、 eMac 、 iMac 、 Power Book G4 、 iBook G4

（ above should equipped with USB2.0 interface ）

Supported OS

・     Mac OS after 10.2.6 release

※ machine not equipped with USB2.0 port is not guaranteed to be supported.

※ Not all the operations in every environment are guaranteed.

C ontents

l           C RO SU2

l           AC adapter

l           AC cable

l           USB Cable

l           instruction manual / guarantee

※ please prepare an HDD to connect by yourself